Novitec has revealed an N-Largo widebody conversion for the Ferrari 12Cilindri. Its new carbon bodywork adds 7 cm across the front and 13 cm at the rear, while model-specific wheels, sport springs and a valved exhaust alter the chassis and sound. The German company describes the project as a limited edition, but has not stated the production total, conversion price or a revised engine output.
A measured width increase with functional openings
Novitec has used the N-Largo name for widebody projects since 2013. The 12Cilindri conversion was developed with German designer Vittorio Strosek, a recurring collaborator on the company's N-Largo cars. Novitec says every new body component is made from carbon fibre and that the package's aerodynamic properties were optimised in a wind tunnel.
The reshaped front and rear wings provide the clearest numerical change. The car is 7 cm wider around the front axle and 13 cm wider at the rear than the production body. Gill-like exposed-carbon outlets in the front wings extract hot air from the wheel wells. Intakes and outlets incorporated into the rear sections are intended to cool and ventilate the rear brakes.
The front fascia is not the production bumper with bolt-on extensions. Novitec has sculpted it to meet the broader wings, adding large intakes and an integrated spoiler. The company says that spoiler reduces lift over the front axle at speed. No downforce curve or independent aerodynamic result accompanies the release, so the claim remains Novitec's engineering statement rather than a Carboratory measurement.
The bonnet receives a carbon-framed outlet through which the engine's two red intake plenums can be seen. Optional visible-carbon covers and air-filter housings continue the treatment beneath it.

The side view shows the enlarged arches, carbon sills and staggered wheel diameters. Official Novitec press image.
Staggered diameters and a 30 mm drop
The wider arches contain NF12 N-Largo wheels developed with Vossen. Each forged wheel has five spokes that split into a Y shape towards the rim, plus a centre cap styled to resemble a centre-lock fastening. Novitec says the design is forged and machined rather than cast.
At the front, the wheel measures 10J x 21 inches and carries a 275/35 ZR 21 tyre. The rear uses a heavily concave 12J x 22-inch wheel with a 325/30 ZR 22 tyre. A standard 12Cilindri has 21-inch wheels at both ends, with 275/35 front and 315/35 rear tyres. The conversion therefore retains the original front tyre width, adds 10 mm of nominal section width at the rear and increases only the rear wheel diameter.
Novitec sport springs lower the ride height by approximately 30 mm. The announcement contains no slalom result, lap time, braking distance or before-and-after ride assessment. A lower centre of gravity and different wheel package may alter responses, but no independent test supports a quantified handling improvement yet.
The rear package integrates the exhaust
A three-piece ducktail spoiler crosses the two rear quarter panels and the decklid. Three scale-like openings are cut into the rear lid, while the wider bumper houses an exposed-carbon diffuser and a pair of exhaust outlets on each side.

The three-piece ducktail, diffuser and four outlets are visible from behind. Official Novitec press image.
The flow-optimised stainless-steel exhaust includes butterfly valves. An occupant can select a quieter or more pronounced sound from the cabin. Novitec also offers a 999-fine-gold plated version, which it says improves heat dissipation as well as changing the appearance. Sport catalysts are optional.
Novitec states that the exhaust and catalysts optimise power delivery, but it does not publish a horsepower or torque gain. That distinction matters: there is currently no verified revised output for the N-Largo, despite the mechanical changes around the standard naturally aspirated engine.
Ferrari's standard V12 numbers remain the reference
The production Ferrari 12Cilindri uses a 6,496 cc naturally aspirated V12 mounted in a front-mid-engine position. Ferrari rates it at 830 cv at 9,250 rpm and 678 Nm at 7,250 rpm, with a 9,500 rpm limit. Drive reaches the rear wheels through an eight-speed dual-clutch transmission.
Ferrari quotes 0–100 km/h in 2.9 seconds, 0–200 km/h in under 7.9 seconds and a maximum speed above 340 km/h. The published dry weight is 1,560 kg with optional lightweight equipment. These are Ferrari figures for the standard car, not Novitec test results.
The tuner has not supplied an N-Largo mass. Carbon can reduce the weight of an individual panel, but the complete conversion also changes the bumpers, wings, wheels, tyres, springs, spoiler and exhaust. Without a measured vehicle weight, it is not possible to calculate a credible new power-to-weight ratio.
The cabin is bespoke rather than a fixed trim level

Novitec says owners can specify the cabin in detail; the blue interior is the presentation car. Official Novitec press image.
Novitec offers to tailor the cockpit to each owner's request. The press car has blue upholstery across the seats, console and door sections, but the release does not provide a public catalogue of hides, colours, options or prices. The photograph therefore illustrates one commissioned treatment, not an N-Largo standard specification.
Buyers can order a complete vehicle configured to their wishes or send an existing 12Cilindri for conversion. Novitec calls the run limited without saying how many slots exist. It also omits a delivery schedule and list price. Those unknowns prevent a direct value comparison with the standard Ferrari or with previous N-Largo projects.
What is confirmed is the physical scope: wider carbon bodywork, model-specific forged wheels, a 30 mm drop, a valved exhaust and optional interior work. Performance beyond Ferrari's original figures remains unquantified until Novitec publishes homologated data or a completed car is independently tested.



